ance 800F过程 控制系统分为了操作员级
和过程控制级。操作员级包含了用于操作和显示.
归档和记录、趋势及报警等功能。控制器执行开环
和闭环回路控制功能。
Freelance 800F DigiVis操作员级
DigiVis操作员站使用PC硬件，既可以是标准商
务用PC机也可以采用工业级PC机，并运行在Micro-
soft Windows操作系统下。DigiVis支持双屏 显示操
作技术，也就是说使用一台PC机可以实现两个操作
员站，并用一个鼠标和一个键盘操作。
操作员级可以安装一个工程师站和几个操作员
站。ControlBuilderF工程师站对系统进行组态和调
式。通常，我们可以使用便携设备例如笔记本，实
现在办公室和现场对系统进行组态。操作员级PC机
也可以当作工程师站。工程师站在系统正常运行期
间可以关闭无需永久与系统连接。
Freelance 800F过程控制级
在过程控制级，Freelance 800F系统可以由
许多连接I/O单元的过程控制站组成。您可以选择这
些过程站为冗余模式(CPU冗余，现场总线模块冗
余)或非冗余模式。模块化的可插拔式输入/输出模
块依照系统过程信号的类型和数量自由选择使用。
AC800F控制器通过现场总线连接远程I/O或现场设
备。
系统通讯
操作员级和过程控制级之间通信使用TCP/IP
协议系统总线(基于以太网)，您可以选择不同
的传输介质例如AUI、双绞线、光纤或同轴电缆。
Freelance OPC服务器用于连接更高-级的操作员
站(800xA) 或其他OPC客户端。Freelance控制 系
统中的实时过程值和报警可以通过OPC进行访问。
我们同时提供一个C语言编程接口嵌入到外部基于
Windows操作系统应用程序中，适用于实现用户使
用非标准OPC通信，即DMS-API 软件包。
nd diagnostic information from the bus, the interface card is easy to replace and plug and play
(Plug & Play), and can be plugged and unplugged.
The field controller PS has the following characteristics:
o
Flexible: supports all international standard open fieldbuses and can be mixed
Simultaneous connection of 4 high-speed fieldbuses (max. 12 MBd)
Simple engineering: configuration, commissioning and diagnostics using only the same tool CBF (Control Build F) software
mouth
Access to all information from the field including equipment management information
Global database of fieldbus devices, control levels and HMI (Human Machine Interface) usage systems
Module identification with production operating parameters
c
complete self-diagnosis
Compact and robust design
Front Panel Wiring
DIN rail (U-shaped) installation well can be directly wall mounted, simple and convenient
o
Allowable operating ambient temperature…60 C, with automatic temperature monitoring
o
EMC (Electromagnetic Compatibility) according to EN50082
mouth
Certifications: CE, NAMUR, CSA, CSA-NRT
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from engineering programming
Think about lowering costs in the first place!
This is what we developed the Freelance 800F system for:
Keeping hardware prices consistent with those of programmable logic controllers
In this way, cost efficiency can be improved by reducing user engineering costs.
How the Freelance 800F process control system helps users reduce
Low engineering cost?
By using a complete engineering tool (Control Builder
F) to configure the entire control system, including automation functions
function, operator interface display and logging, and configuration of the fieldbus.
equipment (PROFIBUS, FOUNDATION Fieldbus,
HART, etc.) and device parameter settings.
Automatic generation of global data between the process control station and the operator station
According to communication.
For field devices, process control stations and operator stations, a unified global database
MMS3120022-000PP826-3BSE042244R1
