ABB PM864A 3BSE018162R1
ABB PM864A 3BSE018162R1
ABB PM864A 3BSE018162R1
S7-1200 CPU具有一个集成的以太网接口，支持面向连接的以太网传输层通信协议。协议会在数据传输开始之前建立到通信伙伴的逻辑连接。数据传输完成后，这些协议会在必要时终止连接。面向连接的协议尤其适用于注重可靠性的数据传输。一条物理线路上可以存在多个逻辑连接（8个）。开放式用户通信支持以下连接类型：
·TCP
·ISO-on-TCP
对于不支持ISO-on-TCP连接的通信伙伴，应使用TCP连接。对于诸如第三方设备或PC这些类型的通信伙伴，请在分配连接参数时，为伙伴端点输入“未指定”。
1″ system communication
Industrial” system uses international standard industrial bus. Field controller supports Profibus, FF, ModBus, Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PAe Flash EPROM inside the PS provides more than 220 functional modules (control algorithm
c
logic operation
Monitoring function
Collection function.
c
arithmetic operations
c
TCP/IP protocol communication interface
Modbus protocol communication interface
1EC870-5 protocol communication interface (Telecontrol)
4.2 Field Controller PS
Industrial” field controller PS is a special process control station, which is embedded with field bus communication interf
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
Communication between the process station, operator station and engineering station takes place via the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the Industrial” system through the ModBus protocol interface. The system also supports IEC870-5 over-control protocol.
discussion.
Th
subroutines), in addition to the basic ones specified in the IEC 61131 3 standard
In addition to this content, many powerful and rigorously tested function blocks from actual engineering applications have been expanded. any complex control
The scheme can be realized by the combination of these function blocks.
The function blocks provided by the system mainly include the following categories:
o
Analog processing
o
digital processing
loop regulation
Logical sequence control
