DS200DCFBG1BLC GE通气燃机卡件 _ 山西润盛进出口有限公司

Product Description

The DS200DCFBG1BLC is a power supply board designed by General Electric for the Mark V series of optional and replacement boards. Members of this series are cross compatible with a number of GE brand exciters and drives. Drives from the DC2000, AC2000, CB2000, ME2000, and FC2000 can all accept this power board. This card provides system control level power to its installed drive, as well as electricity to the enclosure fan. Sourced AC inputs to this board can rate from 38 to 115 VAC. Frequencies accompanying this VAC can range from 0 to 500 kHz, depending on the strength of the inputted voltage.

DS200DCFBG1BLC contains a number of intricate circuit systems designed to power a majority of the drive. The card includes both an AC and DC monitoring circuit, the control level supply circuit, a motor field power circuit, and a driver circuit. Users can configure the twelve jumpers and seven DIP switches on the card to meet any external requirements. Board status is communicated to the user via the onboard indicators. Two LED and one neon indicators are built into the card, providing users with important diagnostic and status information. Three of the board’s fuses are protected, ensure that interruptions or surges will not disrupt the currents. Be sure to monitor voltage levels periodically using the five test points integrated into the board.

Following provided installation parameters from both DS200DCFBG1BLC and the drive is imperative. These guidelines will ensure that the board and its installed system operates as intended. For a wiring and installation guide, please refer to the series manual as well as the device datasheet. Technical support for all boards in the Mark V series was originally provided by the manufacturer, General Electric.

Our trusted team at AX Control is happy to help with all of your DS200DCFBG1BLC needs. Please contact a member of our team by phone or email to receive prices and availabilities on all parts and repairs.

Frequently Asked Questions about DS200DCFBG1BLC

How much input power does DS200DCFBG1BLC receive from the CPT?

DS200DCFBG1BLC receieves 38 and 115 VAC (24 VDC) input power from the control power transformer (CPT) connected to DS200DCFBG1BLC.

Where can I find descriptions of the connector pins on DS200DCFBG1BLC?

DS200DCFBG1BLC gets and sends input and output signals/power via 18 plug connectors and 9 stab connectors. Tables 6-22 in the manual for DS200DCFBG1BLC, Manual GEI-100028, provide descriptions for each of the connectors. The tables in the manual identify DS200DCFBG1BLC connectors by pin, nomenclature, and description. Figure 1 in the manual for DS200DCFBG1BLC, which is the GE Industrial Systems Power Supply Manual, also shows locations of the connectors via a DS200DCFBG1BLC board layout diagram.

How many jumpers does DS200DCFBG1BLC have?

DS200DCFBG1BLC has 12 configurable jumpers. For locations of the jumpers The jumpers on DS200DCFBG1BLC are jumpers JP1-JP14 but jumpers JP13 and JP14 have been deleted on DS200DCFBG1BLC. You can find locations of DS200DCFBG1BLC’s jumpers in figure 1 in the manual and you can find descriptions of the jumpers on DS200DCFBG1BLC in table 1 of the manual – Manual GEI-100028. For a copy of the manual, request DS200DCFBG1BLC’s manual.