系统故障、过程报警、开关动作和操作员提示。可为过
程消息类型指定不同的优先级(从0~5),系统故障另分成三个优先级(SI ~S3).不同优先级的消息
以不同的颜色显示并可选择不同的确认方法。此外还显示过程点的名称和故障状态。所有消息均可
以中文显示,同时可发出声音。
消息行
二,
各种显示画面的项部区均为消息行,用以对来自整个重重雪
过程的各种不同消息类型进行更高-级的显示。消息行显
示最末或最先的5个消息,以及消总确认和操作员提示调
出按钮。消息行还有消息容量溢出指示区和未确认消息个
数显区.
一.1:
故障过程点的面板窗口可从消息行直接调出以便快速操作。
消扈一览衰
消息一览表显示列出了所有当前消息的概况,它按时间先后顺序列出了发生的过程报警、开关动
作以及系统故障等不同类别的消息。最末产生的消息在消息一览表的消息一 -览表 显示列出了所有当前
消息的概况,它按时间先后顺序列出了发生的过程报警、开关动作以及系统故障等不同类别的消息。
最末产生的消息在消息- -览表的首行或尾行。消息的时间排序方式(升序或降序)可以在线更改。同消
息行一样,不同的优先级的颜色不同。消息可成块确认或整页确认。
为观察更加清晰,操作员可把某个优先级或装置区域的消息暂时从屏幕上取消而不显示。消息-
览表的容量大小由组态决定,如果当前的消息数目超过所组态的容量规模,则先进入的消息被删除,
以让出空间给当前消息进入。
IS200VSVOH1B
each control
The station can support several thousand I/0 points at most, and the scale of the whole system can be expanded. The hardware of the system control station is encapsulated in an all-metal shell, which can withstand the most
Harsh industrial environment. The device can be installed either in a cabinet or on a wall. System complies with all current EMC standards and is CE marked
Chi.
Industrial” DCS system design purpose: the most economical engineering investment, the most powerful control function.
Five features of Industria1″ DCS system:
1. All-round integrated control system, integrating DCS & PLC & Field Bus;
MM-PM41400CPM+4000
2. Using RISC SuperScalar high-speed CPU, with super performance;
Three high reliability, strict industrial application practice, more than 1000 sets of application performance in China;
4. It has good openness, flexibility and scalability;
Fifth, the project is easy, the interface is friendly, and the maintenance is simple;
2. Industria1″ system communication
Industrial” system uses international standard industrial bus. Field controller supports Profibus, FF, ModBus, Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
MM-PM41400CPM+4000
Communication between the process station, operator station and engineering station takes place via the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the Industrial” system through the ModBus protocol interface. The system also supports IEC870-5 over-control protocol
操作员提示览表
对于每个过程报警消息和开关动作消息均可组态相应的操作员提示。