对于现场设备、过程控制站和操作员站，整个控制系统采用了一个统一的全局数据库，从而降低
了建立数据通信及交互访问的成本和时间投资.
并保证整个系统范围内数据的一致性。
●提供系统全局范围的用户应用程序统一检查,覆
盖过程控制站、操作员站到智能的现场设备，包
括对用户程序的完整性和一致性检测。
●编程语言严格遵守IEC61131-3的国际标准，并具
有高性能的图形编辑功能:
-功能块图(FBD)
-梯形图(LD)
-指令表(IL)
-顺控图(SFC)
. 结构文本(ST)
●宽泛的功能块库，用户自定义的功能块也可以添
加到其中，宏库和图形符号可以为用户自定义功
能块建立图形和操作面板。
●可以通过GSD文件导入的方式来集成任何标准
PROFIBUS-DP和PA设备，并通过用户自定义对
话框形式来设计对这些设备组态配置的窗口。
●可以通过FDT/DTM技术来集成PROFIBUS现场总
线设备
系统结构
Freelance 800F过程 控制系统分为了操作员级
和过程控制级。操作员级包含了用于操作和显示.
归档和记录、趋势及报警等功能。控制器执行开环
和闭环回路控制功能。
Freelance 800F DigiVis操作员级
DigiVis操作员站使用PC硬件，既可以是标准商
务用PC机也可以采用工业级PC机，并运行在Micro-
soft Windows操作系统下。DigiVis支持双屏 显示操
作技术，也就是说使用一台PC机可以实现两个操作
员站，并用一个鼠标和一个键盘操作。
操作员级可以安装一个工程师站和几个操作员
站。ControlBuilderF工程师站对系统进行组态和调
式。通常，我们可以使用便携设备例如笔记本，实
现在办公室和现场对系统进行组态。操作员级PC机
也可以当作工程师站。工程师站在系统正常运行期
间可以关闭无需永久与系统连接。
Freelance 800F过程控制级
在过程控制级，Freelance 800F系统可以由
许多连接I/O单元的过程控制站组成。您可以选择这
些过程站为冗余模式(CPU冗余，现场总线模块冗
余)或非冗余模式。模块化的可插拔式输入/输出模
块依照系统过程信号的类型和数量自由选择使用。
AC800F控制器通过现场总线连接远程I/O或现场设
备。
系统通讯
操作员级和过程控制级之间通信使用TCP/IP
协议系统总线(基于以太网)，您可以选择不同
的传输介质例如AUI、双绞线、光纤或同轴电缆。
Freelance OPC服务器用于连接更高-级的操作员
站(800xA) 或其他OPC客户端。Freelance控制 系
统中的实时过程值和报警可以通过OPC进行访问。
我们同时提供一个C语言编程接口嵌入到外部基于
Windows操作系统应用程序中，适用于实现用户使
用非标准OPC通信，即DMS-API 软件包。
项目数据
PU515A-3BSE032401R1
fied global database is used for the entire control system, thereby reducing
cost and time investment in establishing data communication and interactive access.
And ensure the consistency of data throughout the system.
Provide system-wide unified inspection of user applications, overriding
from process control stations, operator stations to intelligent field devices, including
Including the integrity and consistency check of the user program.
The programming language strictly complies with the international standard of IEC61131-3, and has
There are high-performance graphics editing functions:
– Function Block Diagram (FBD)
-Ladder Diagram (LD)
– Instruction List (IL)
– Sequence Control Chart (SFC)
. Structured Text (ST)
Extensive function block library, user-defined function blocks can also be added
Added to it, the macro library and graphic symbols can be customized for the user.
Blocks can create graphics and operator panels.
Any standard can be integrated by means of GSD file import
PROFIBUS-DP and PA devices, and through user-defined pairing
dialog box to design the configuration window for these devices.
Profibus field controller can be integrated through FDT/DTM technology
line equipment
system structure
The Freelance 800F process control system is divided into operator levels
and process control level. The operator level contains controls for operation and display.
Archiving and logging, trending and alarming functions. Controller executes open loop
and closed loop control function.
Freelance 800F DigiVis Operator Level
DigiVis operator stations use PC hardware, either standard commercial
Business PCs can also be industrial-grade PCs and run on Micro-
under soft Windows operating system. DigiVis supports dual-screen display operation
operating technology, that is to say, two operations can be performed using one PC
station and operate with a mouse and a keyboard.
Operator level can install one engineering station and several operators
stand. ControlBuilderF engineering station configures and adjusts the system
Mode. Usually, we can use portable devices such as notebooks to
The system is now configured in the office and on site. Operator-level PC
Can also be used as an engineer station. Engineer standing during system uptime
Intervals can be closed without a permanent connection to the system.
Freelance 800F Process Control Stage
At the process control level, the Freelance 800F system can be controlled by
It consists of a number of process control stations connected to I/O units. you can choose this
Some process stations are in redundant mode (CPU redundancy, fieldbus module redundancy
redundant) or non-redundant mode. Modular pluggable input/output modules
Blocks are freely selected and used according to the type and number of system process signals.
AC800F controller connects remote I/O or field device via fieldbus
ready.
system communication
Communication between operator level and process control level using TCP/IP
Protocol system bus (based on Ethernet), you can choose different
transmission medium such as AUI, twisted pair, fiber optic or coaxial cable.
Freelance OPC server for connecting to higher-level operators
station (800xA) or other OPC client. Freelance Control System
Real-time process values and alarms in the system can be accessed via OPC.
We also provide a C language programming interface to embed external
In Windows operating system applications, it is suitable for implementing user
Communicate with non-standard OPC, ie DMS-API software package.
Project database
All configured signals, variables and process points are in Freelance
800F system’s public database for management.
List of all variables (input, output, internal variables)
Process point list (function block)
Graphics
Program
Because the database is system-wide. The data only needs to enter a
times, to avoid possible errors caused by multiple configurations.
Project database files can be easily archived or backed up.
When programmed by the user, a list of variables and labels is automatically created.
Moreover, both variables and process points can be opened and closed directly in FBD or IL
Revise.
List other features include:
Project-wide modification of names, comments, data or module types
●Search and display based on specific criteria
● Cross reference can be used in systems that use a large number of variables or process points
Programs and drawings to quickly find the desired variable or process point within the scope
noodle.
ABB is the world’s largest in measurement and process automation
One of the equipment and system suppliers.
An important factor in maintaining this market position is the quality of our products
quantity, and quality from manufacture all the way to service. ABB automation early
In 1990, it obtained the DQS certificate based on ISO9001 certification,
EQnet quality based on ISO 9000/EN 29000 was subsequently achieved
Certification.
However, the Freelance 800F is more than technical excellence, I
We have also spent a lot of effort in proper planning, installation and revision too
This makes engineering design and maintenance faster, more economical and more efficient.
Industrial” is a world-leading all-round integrated open control system launched by ABB Group Automation Headquarters.
It integrates the advantages of traditional DCS and PLC in one body and supports a variety of international field bus standards. It has both the complex analog loop regulation capability of DCS
Power-friendly human-machine interface (HMI) and convenient engineering software, and at the same time have high-speed logic and sequence control equivalent to high-end PLC indicators.
control performance. The system can be connected to both conventional I/0 and various field bus devices such as Profibus, FF, CAN, and Modbus. system tool
It has a high degree of flexibility and excellent scalability, whether it is the control of small production units, or the control of ultra-large-scale whole plants – integrated control, even
The Industrial” system can handle the application of field equipment maintenance management and cross-plant produc
PU515A-3BSE032401R1IS215UCVEM06A
