140CPU65260
140CPU65260
140CPU65260
同一工程软件完成控制策略组态和HMI组态。(即硬件配置组态、过程控制编程、操作
站组态- – 体化)
J 高性能图形化组态编辑工具，符合1EC61 131-3标准
功能库提 供220 多个功能(算法)模块，远超过IEC61131 3所规定 的基本内容
宏库提供200多个可扩展和定义的图形符号和大量三维图例供画面组态
o采用项目树使得程序生成灵活，程序组织清晰明了
J 采用统一的系统全局数据库
Windows 下的在线帮助功能
o项目文件备份
o口令保护
项目树
项目树是用于管理和调试整个用户程序(组态内容)的核心工具。所有的项目组态数据均以树结构
方式显示，在项目树中可访问系统组态的全部内容。项目树的结构非常直观，与Microsoft Windows
的文件管理器很类似。在项目树中:
o项目树中的组态数据呈结构化
口定义任务级别并分配到相应的硬件设备
的
J 为各任务级别分配所属程序
J程序、显示和记录可在项目树中调用、复制和移动
对程序编译检查，并显示相应的处理状态
o
引入和输出项目组态
o下载用户程序至相应的过程站PS
J‘ 下载用户程序至操作站或计算机接口站
项目数揭库
Industrial”系统的信号、变量和过程点均由- -个公共项目数据库管理。包括变量- -览表(如I/0
及内部变量)和回路(标签) – -览表(功能块用) .数据库是全局性的，故数据只需键入一次，从而
避免组态时可能发生的混乱和错误。- -次至数据键入还能大大减少系统调试时的时间耗费，缩短工期
并节省金钱。
建立用户程序时会自动生成变量和回路(标签)- -览表， 变量和过程点也可在FBD、LAD 或IL中
直接打开并修改。在- -览表中可对每条记录的名称、说明、数据或模件类型进行项目全局范围内的修
改，可进行指定条件查询。- -览表的另- -重要功能是交叉参考功能，它可帮助工程师在全系统范围内
迅速查找出并自动打开与指定变量或回路位号相关的程序及显示画面。
控制策
20f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station
The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS can only be configured
-Block fi810f card. — The two fi810f interface cards on the redundant PS. can be switched redundantly.
The system uses the same set of configuration tool software to complete the configuration and debugging of process level, operation level and even fieldbus instruments, and uses the same
a global database.
The scale of the system is highly scalable, and a single-system supports 1 to a maximum of 100 control stations and 100 operating stations. each control
The station can support several thousand I/0 points at most, and the scale of the whole system can be expanded. The hardware of the system
Communication, which can be installed in the controland PA three levels, DP communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The biggest feature is its super sturdiness and data security. The system of course also supports Modbus. The communication with the intelligent field instrument is through
IART protocol or field bus (31. 25Kb ProfibusPA and FF bus).
The system communication between the operation management level and the process control level is realized by Di giNetS network (Industrial Ethernet/IEEE802.3 standard),
Users can choose the communication transmission medium (ordinary cable or optical fiber) and network topology according to the actual situation of the application.
The popular PC and MS_ Windows 2000 have been widely used in various fields all over the world, becoming the de facto standard computer platform.
tower. The operating station 0S, the engineering station ES and the data gateway GS of the Industrial” system use this platform to ensure the system’s
S800 and S900 are distributed i/0 for process control stations. They communicate with their controllers through Prof ibusdp FieldbusVersatility, openness and ease of use, and bring great convenience to future technical upgrades and maintenance.
System engineering is very convenient. The configuration language is based on the IE061131 3 industry standard, providing function block diagram (FBD), ladder diagram
(LD), instruction list (IL), sequential function chart (SFC), structured text (ST) and other graphical configuration methods. The system contains about 220 functions
Algorithm library for energy blocks and a basic library with more than 200 graphic symbols and an extended library with a large number of 3D symbols.
140CPU65260
