8610-FT-NA
8610-FT-NA
8610-FT-NA
控制策略组态方法_指令衰(IL)
指令表与计算机汇编语言比较类似，系统所有的过程处理功能均可由指令表编程实现.它能实现
诸如程序跳转和循环等FBD、LAD 及SFC所无法实现的功能。操作符可被显示和键入，并提供一个符
合IEC61131 3标准的带有下拉条的操作符列表框供直接输入。指令表中也可调用功能块和FBD图中
的其它操作，功能块参数定义方法与在FBD中完全-样。
22
MOL0O.
控制鐐略組态方法_梯形图(LD )
梯形图(LAD)也是1EC61131_ 3规定的一-种图形化组态语言，它起源于传统的由继电器线圈和触点
组成的反映逻辑电路电流状态的逻辑梯形图。梯形图的左右边界线分别称为供电母线和公共母线，梯
级由链接线、触点和线圈等梯形图元素构成。梯形图中同样也可调用功能块，功能块参数定义方法与
FRD中完全-样。梯形图最适于组态逻辑控制功能。
硬件
ct process data and diagnostic information from the bus, the interface card is easy to replace and plug and play
(Plug & Play), and can be plugged and unplugged.
The field controller PS has the following characteristics:
o
Flexible: supports all international standard open fieldbuses and can be mixed
Simultaneous connection of 4 high-speed fieldbuses (max. 12 MBd)
Simple sed to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of co
Compact and robust design
Front Panel Wiring
DIN rail (U-shaped) installation well can be directly wall mounted, simple and convenient
o
Allowable operating ambient temperature…60 C, with automatic temperature monitoring
o
EMC (Electromagnetic Compatibility) according to EN50082
mouth
Certifications: CE, NAMUR, CSA, CSA-NRT
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to descr
mouth
Access to all information from the field including equipment management information
Global database of fieldbus devices, control levels and HMI (Human Machine Interface) usage systems
Module identification with production operating parameters
engineering: configuration, commissioning and diagnostics using only the same tool CBF (Control Build F) softwarec
complete self-diagnosisibe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is u
