ABB UNS0881a-P,V1 3BHB006338R0001
ABB UNS0881a-P,V1 3BHB006338R0001
ABB UNS0881a-P,V1 3BHB006338R0001
系统诊1就亚不
系统硬、软件的当前状态由-一个在后台自动运行的系统诊断程序进行监视。
诊断显示的结果在标准化系统显示中分三个详细层次进行描述:
系统状态显示(显示包括操作站、过程站、现场控制器以及系统总线DigiNetS 和站总线
DigiNetP在内的系统结构总貌和状态)
●站状态显示(显示 某站的状态信息)
●模件状态显示(显示与所选模件有关的详细信4)。
5. 3系统工程组态与调试维护工具软件CBP (Control Builder F)
CBF:是Industrial “DCS控制系统的工程工具，它是集组态(包括硬件配置、控制策略、HIS即人机
接口等组态)、工程调试和诊断功能为- -体的工具软件包。CBF采用统- -的 系统全局数据库和强大的交
叉参考工具，不仅能方便地完成自动化组态，而且是一个高性能的过程调试工具。Industrial”DCS系
统过程控制站PS所需的各种控制算法和策略都是由CBF来组态的，井采用图形化的组态方法(符合
1EC61131- 3标准)。
CBF也用于对操作站人机接口(HIS)功能的组态并还可直接对现场总线设备进行组态。
控制算法和策略组态可选用以下IEC 61131-3标准组态方法中的一-种或几种:
FBD (功能方块图 )
JD (梯形图)
SFC (顺序功能图 )
IL (指令表)
sT (结构化文本)
CBF安装在Industrial “系统工程师站上，完成后的组态结果由工程师站通过系统网络下载至相应
的现场控制器PS及操作站0S中。组态既可在线也可离线。离线组态仅需-台装有CBF软件的计算机。
系统提供-一个含有220多种功能模块(标准算法程序)的功能块库，除了IEC 61131 _3 标准规定
的基本内容外，还扩充了许多功能强大并经过严格测试的功能块。用户还可自定义功能块和由若千功
能块组成的用户宏。CBF 还提供200 多个标准图形符号(静态和动态)及大量美观实用的立体图例可
供HIS组态选用。
CBF在执行组态编译时能自动查找定位错误源，交叉参考功能可帮助工程师迅速查找对应的变
量位号、功能块及操作画面，大大提高了组态效率。CBF可引入或导出ASCII 程序、显示画面、变
量位号和部分项目树。CONTROL BUILDER F还可输出包括全部组态结果的图形化工程文档。
CBF (Control Builder F)还具有如下特点: .
o
and process points can be opened and closed directly in FBD or IL
Revise.
List other features include:
Project-wide modification of names, comments, data or module types
Search and display based on specific criteria
Cross reference can be used in systems that use a large number of variables or process points
Programs and drawings to quickly find the desired variable or process point within the scope
noodle.
ABB is the world’s largest in measurement and process automation
One of the equipment and system suppliers. and batch intermittent control functions.
The internal communication of the process control station (between the controller and various intelligent devices such as I/0 or field instruments) adopts the international standard field controller.
Wire. The field controller supports various field buses such as Profibus. Profibus is the most widely used open field bus in the world.
Line international standard, divided into FMS, DP and PA three levels, DP communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The biggest feature is its super sturdiness and data security. The system of course also supports Modbus. The communication with the intelligent field instrument is through
IART protocol or field bus (31. 25Kb ProfibusPA and FF bus).
The system communication between the operation management level and the process control level is realized by Di giNetS network (Industrial Ethernet/IEEE802.3 standard),
Users can choose the communication transmission medium (ordinary cable or optical fiber) and network topology according to the actual situation of the application.
The popular PC and MS_ Windows 2000 have been widely used in various fields all over the world, becoming the de facto standard computer platform.
tower. The oper
Certification.
However, the Freelance 800F is more than technical excellence, I
We have also spent a lot of effort in proper planning, installation and revision too
This makes engineering design and maintenance faster, more economical and more efficient.
Industrial” is a world-leading all-round integrated open control system launched by ABB Group Automation Headquarters.
It integrates the advantages of traditional DCS and PLC in one body and supports a variety of international field bus standards. It has both the complex analog loop regulation capability of DCS
Power-friendly human-machine interface (HMI) and convenient engineering software, and at the same time have high-speed logic and sequence control equivalent to high-end PLC indicators.
control performance. The system can be connected to both conventional I/0 and various field bus devices such as Profibus, FF, CAN, and Modbus. system tool
It has a high degree of flexibility and excellent scalability, whether it is the control of small production units, or the control of ultra-large-scale whole plants – integrated control, even
The Indu
An important factor in maintaining this market position is the quality of our products
quantity, and quality from manufacture all the way to service. ABB automation early
In 1990, it obtained the DQS certificate based on ISO9001 certification,
EQnet quality based on ISO 9000/EN 29000 was subsequently achievedstrial” system can handle the application of field equipment maintenance management and cross-plant production management control with ease.
An important member of the Industrial” family, the AC800F system fully embodies the Industrial” (Industrial Information) system pioneered and led by ABB in technology.
information technology) new trends.
The system is divided into two levels: operation management level and process control level. At the operation management level, not only the traditional control system monitoring operation function is realized
function (operation and display, printing, trend display and alarm), and also complete system hardware diagnosis and data exchange between different systems.
can. The process control stage realizes various loop adjustments including complex control (various PID, ratio, Simith, etc.) and high-speed logic control.
Control, sequence control
