IS200TPROH1B全新备件

IS200TPROH1B全新备件  IS200TPROH1B全新备件 IS200TPROH1B全新备件Product Information
The IS200TPROH1B全新备件  is a power supply board that was designed and manufactured by General Electric as part of their Mark V SPEEDTRONIC series of products. The DS200DCFBG1B board is versatile, with an ability to be used in many IGBT drive applications, including: AC2000, CB2000, DC200, EX2000, FC2000, GF2000, and ME2000. The DS200DCFBG1B board is designed to receive 38 and 115 VAC input power from the CPT, or control power transformer. The DS200DCFBG1B board then provides control level power to its drive and 115 VAC power to its enclosure fans. There are many circuits that are included on the DS200DCFBG1B board, including: Motor field power circuits, circuits to monitor AC line and DC motor signals, control level power supplies, and driver circuits that are made for use with the motor field SCR gate pulse. There are five test points located on the DS200DCFBG1B board that allow the user to check the voltage signals, the status of the voltage signals, and the DCFB board common. The DS200DCFBG1B board also has three fuses that are used to protect the power supply. When replacing a DS200DCFBG1B board, be sure that the drive’s power is shut off. Failure to follow this step can result in serious injury. Disconnect all cables from the DS200DCFBG1B board and push back on the plastic holders to release the board from its carrier. Position the new board so that it is in the same orientation as the old one and place it into the carrier. Then, you can reconnect the cables to the board as labeled. After that, you will need to adjust the board’s EE parameter for voltage feedback offset.